Current position: Products -100M series

E1/4ETH Logical isolation converter

E1 / 4ETH protocol converter provides ITU-T G.703 standard E1 interfaces and four 10 / 100Base-T Ethernet Interface Converter, 10 / 100Base-T channels will be transferred to the switch, HUB, routers, bridges or other devices on, and through the use of existing networks (PDH / SDH / microwave, etc.) provided by the E1 channel transmission, after two LAN networking has become both a LAN segment.

The protocol converter is a high performance, adaptive remote Ethernet bridge. Its small size, low cost, it is suitable for cost-sensitive bridging applications or as a LAN extender or segmented basis of bitstream structure. Widely used in between WAN and LAN networking, monitoring and other occasions.

□ based on proprietary integrated circuit;
□ built dynamic Ethernet MAC address list (4096), with local data frame filtering function;
□ 4-way 10M / 100M Ethernet interface isolated from each other, achieve Independent Communications
□ E1 interfaces and four Ethernet interface has lightning protection;
□ there can detect E1 loopback, and is indicated by the indicator;
□ can distinguish E1 signal loss when the remote device is powered down or disconnected intermediate transmission E1;
□ Ethernet interface 10M / 100M, full / half duplex fully adaptive, support VLAN protocol;
□ Ethernet port supports AUTO-MDIX (crossover cable and straight-line adaptive);
□ provide two kinds of clock ways: E1 master clock, E1 line from the clock;
□ can force the device to follow the rate of the end of the end of this end;
□ provides three loopback function: E1 local loopback (ANA), Ethernet local loopback (DIG), command the remote Ethernet loopback (REM);
□ while supporting adaptive 120Ω / balance and 75Ω / Imbalance impedance, no need to make settings;
□ support desktop, 1U high 19-inch rack-mount, 4U chassis card type;
□ support SNMP network management;

E1 Interface

Equipment E1 interface comply with G.703

Rate: N * 64Kbps (framing) or 2048Kbps ± 50ppm (non frame)

Pattern: HDB3

Impedance: Unbalanced 75W / 120W balanced

       Unbalanced with coaxial adapter, which can be adapted to 75-2 / 3 coaxial

Jitter characteristics: meet G.742, G.823 recommendation

Allows input attenuation: 0∽6dBm

Ethernet interface (10 / 100M)

Rate: 10 / 100MM adaptive, full / half duplex fully adaptive

Agreement: support IEEE 802.3, IEEE 802.1Q (VLAN)

MAC address table: 4096 MAC addresses can be learned

Physical interface: RJ45 seat support (cross / straight-line adaptive) Auto-MDIX

Power requirements

System Power: AC180V ~ 260V;

     DC -48V;

     DC + 24V

working environment

Working temperature: -10 ℃ ∽ ~ 50 ℃

Humidity: 5% ∽95% (non-condensing)

Storage temperature: -40 ℃ ∽80 ℃

Storage humidity: 5% ∽ 95% (non-condensing)

Contact:0571-81389112      Digital map | Contact us | Legal Description |     Copyright Hangzhou Xeikon Communication Technology Co., Ltd. All rights reserved. Zhejiang ICP No. 09064986