SCMP-F8
1 Gigabit optical+8 100Mbps electrical port (physically isolated)
True channel isolation ensures complete physical isolation of 8 Ethernet channels transmitted through the same fiber optic line;
Ethernet interface 10M/100M, full/half duplex adaptive;
It has functions such as broadcasting storm protection, balancing traffic, isolating conflicts, and detecting errors;
Supports 1916 byte ultra long frame transmission and is fully compatible with forwarding various extended protocol data frames;
Support 802.3x full duplex flow control Back Pressure half duplex flow control;
Can provide Ethernet paths with a line speed of 100M for each port simultaneously;
Optical path interruption fault transfer function, when the optical path line fails, it does not send LINK signal to the Ethernet interface and transmits it to the other end device;
Optional optical ports SC/FC/ST, single/multi-mode, single/dual fiber, transmission distance: 2~120KM;
Built in lightning protection circuit can greatly reduce damage caused by lightning induction;
The 1 Optical 8 Electrical Physical Isolation Series is an Ethernet optical switch developed by our company based on independent software. This series of products reuses the Ethernet interface 10/100Base TX into a gigabit fiber optic interface, providing users with access to 100M Ethernet with complete physical isolation of each electrical port, without interference, ensuring the security of network transmission, enhancing network controllability, and facilitating internal management.
The physical isolation series Ethernet optical switch meets various indicators in standards such as 3C, CE/FCC, EN61000, etc., with MTBF:>70000 hours; Its high stability and reliability make it an ideal choice for use in any environment.
Ethernet port
Number of electrical ports: 8 (completely physically isolated)
Speed: 10/100M adaptive, full/half duplex fully adaptive
Protocol: Supports IEEE 802.3, IEEE 802.1Q (VLAN)
MAC Address Table: Can learn 4096 MAC addresses
Physical interface: RJ45 socket, cross/straight line adaptive
Optical interface
Wavelength: Single mode 1310nm/1550nm
Multimode 850nm/1310nm (optional)
Fiber core count: single fiber/dual fiber (optional)
Transmission length: Single mode 20/40/60/80/100/120km
Multimode: Single fiber: 550m Double fiber: 2km (optional)
Optical module: SC/FC/ST (optional)
work environment
Working temperature: 0~50 ℃
Storage temperature: -20~70 ℃
Relative humidity: 5-90% (no condensation)
Power Supply
Power supply: DC5V/2A (external)
