SCK09-X88-06
9U frame type
◆ 9U machine frame;
◆ Key modules such as the main control and power supply are backed up in a 1:1 ratio;
◆ Designed for 10G platforms, adopting a distributed multi-level switching matrix architecture;
◆ Equipped with high-performance ASIC switching chips and multi-core processors;
◆ Support high-density 10G business boards and achieve three-layer full line speed non blocking switching between boards;
◆ Single business board supports up to 512K MAC address table entries and 512K layer 3 routing table entries;
◆ Supports STP/RSTP/MSTP protocol, VRRP protocol, and ring network protection;
◆ Supports a wide range of IPv4 and IPv6 three-layer routing protocols, multicast protocols, and policy routing mechanisms;
◆ Capable of L2/L3/L4 line speed switching and positioned at the network core layer;
◆ Equipped with advanced features such as QoS, MPLS, NAT, bandwidth control, multicast, etc.
SCK09-X88-06 is a high-capacity 10 Gigabit core switch designed for core networks. In order to meet the high-performance requirements of market business, the green and energy-saving design concept is adopted in hardware. Through the design of high-frequency, high-density, and highly stable multi-layer circuit boards, high-frequency and low impedance devices are selected to greatly reduce the power consumption of equipment. While improving network operation efficiency, it effectively reduces user operating costs. In terms of software, it is equipped with a multi-layer switch operating system that supports the vast majority of enterprise network layer 2 and layer 3 data exchange business needs. The core layer of park networks that can be widely applied to various industries can provide users with multi service network solutions.
Business port:
2 main control board slots
4 business module slots
Exchange capacity:
87.2Tbps
Packet forwarding rate:
26800Mpps
Physical specifications:
relative humidity
10% to 90% non condensing
Operating temperature
0～50°C
Power characteristics:
Communication: 100-240VAC, 50/60 Hz
Power redundancy:
1+1 backup, supports hot swapping
Physical dimensions:
455mm×436mm×382mm
power waste:
500W
Standard:
9U
Supporting protocol standards:
IEEE 802.3,10BASE-T Ethernet
IEEE 802.3u, Fast Ethernet standard
IEEE 802.3ab, Gigabit Ethernet standard
IEEE 802.3z, Gigabit Ethernet Fiber Standard
IEEE 802.3ae, 10G Ethernet standard
MAC address:
128K MAC Address Table
Automatic update, bidirectional learning
MAC address aging time setting
Port cache:
128Mb
Mega frame:
9216bytes
VLAN configuration:
Maximum 4096 VLANs
port VLAN
Support MAC based dynamic VLAN allocation and QinQ support
VLAN based on 802.1Q standard
Generate tree:
STP Spanning Tree Protocol
RSTP Fast Generative Tree Protocol
MSTP Multi Generative Tree Protocol
Port aggregation:
Static aggregation, dynamic aggregation
Port mirroring:
Many to one port mirroring with no limit on the number of source ports for mirroring
Support 4 sets of mirrors
Port flow control:
Half duplex based on back pressure control;
Full duplex based on PAUSE frames;
Port speed limit:
Port based input/output bandwidth management
IP routing:
Static routing
Support routing protocols such as RIP, OSPF, ISIS, BGP, etc
Redundant backup
VRRP
IPv6
Static routing, RIPng, OSPFv3
Supports dual stack of IPv6 and IPv4
Support Pingv6 and Telnetv6
Multicast control:
Support IGMPvl/v2/v3, IGMPvl/v2/v3 Snooping, PIM DM, PIM SM, PIM SSM
DHCP:
DHCP Server
DHCP Snooping
DHCP Relay
Storm suppression:
Suppress broadcasting, multicast, unicast, etc
Security features:
Hardware IP ACL, MAC ACL, Vlan ACL, supporting ACL functionality based on layers three and four
Hardware port based IP+MAC binding
User level management and password protection
QOS:
802.1p Port Queue Priority Algorithm
Cos/Tos, QoS tags
WRR (Weighted Round Robin), Weighted Priority Rotation Algorithm
Network cable sequence:
Auto MDIX function, automatically recognizes straight through and crossover network cables
Multi protocol label switching:
Support MPLS VPN/VLL/VPLS
Hardware monitoring:
Support independent hardware monitoring module, able to manage the power module and fan module of the device, support hot plugging, and support redundant backup function.
Air duct design:
Suitable for parallel deployment of cabinets, the equipment chassis (including the business card area) adopts a rear air duct design.
Point by point detection
Support the ability to detect any business flow anytime, anywhere, point by point based on real business flow.
Reliability:
Support hardware BFD/0AM, 3.3ms stable and uniform packet detection, improving device reliability.
Negotiation mode
Port auto negotiation function (self negotiating transmission rate and duplex mode)
System maintenance:
Upload/Download Configuration Files
Upload upgrade package
WEB Restore Factory Configuration
System logging function
Support Ping
Network management:
WEB interface management (supporting HTTP and HTTPS protocols)
CLI interface management
Telnet remote management
SSH 2.0
Support SNMP network management
Support NTP client
